Wollastonite Uses And Processing Production2021-06-30

What Is Wollastonite

Wollastonite is a triclinic, thin plate-like crystal, aggregates were radial or fibrous. The color is white, sometimes with light gray, light red color with glass luster, cleavage surface with pearl luster. Hardness is 4.5 to 5.5; density is 2.75 to 3.10g/cm3. Completely soluble in concentrated hydrochloric acid. Under normal circumstances is acid, alkali, chemical resistance. Moisture absorption is less than 4%; low oil absorption, low electrical conductivity, good insulation. Wollastonite is a typical metamorphic mineral, mainly produced in acid rock and limestone contact zone, and Fu rocks, garnet symbiotic. Also found in the deep metamorphic calcite schist, volcanic eruption and some alkaline rocks. Wollastonite is an inorganic needle-like mineral, characterized by non-toxic, chemical corrosion resistance, good thermal stability and dimensional stability, glass and pearl luster, low water absorption and oil absorption, mechanical properties and excellent electrical properties and a certain Reinforcing effect. Wollastonite products is long fiber and easy separation, low iron content, high whiteness. The product is mainly used for polymer-based composites reinforced filler. Such as plastics, rubber, ceramics, coatings, building materials and other industries..

Usage Of Wollastonite Powder

In the ever-changing technology today, wollastonite industry has developed by leaps and bounds, the world's main use of wollastonite is the ceramic industry, and it can be used as plastic, rubber, paint, functional fillers in paint field. At present, China's main consumption area of wollastonite is ceramic industry, accounting for  55%; Metallurgical industry accounted for 30%, other industries (such as plastic, rubber, paper, paint, welding, etc.), accounting for about 15%. 

1. Ceramic industry: Wollastonite in the ceramic market is very mature, widely used in the ceramic industry as the green body and glaze, makes the green body and glaze from crack and easy break, no cracks or flaws, increase glaze surface gloss degree.

2. Functional filler: High purity wollastonite used as inorganic white pigment is widely used in coatings, can replace some of the expensive titanium dioxide.

3. Asbestos substitutes: Wollastonite powder can replace some asbestos, glass fiber, pulp, etc., mainly used in the fire board and cement materials, friction materials, indoor wall panels.

4. Metallurgical flux: Wollastonite can protect molten steel not been oxidized under molten state and high temperature, widely used in the metallurgical industry. 

5. Paint: Adding wollastonite paint can improve the physical properties, durability and resistance to climate, reduce the aging of the paint.

Wollastonite Powder Processing Technological Process

Phrase One: Raw Material Crushing

Wollastonite blocks will be crushed to 15mm-50mm fineness by crusher.

Phrase Two: Grinding

Crushed wollastonite blocks will be sent to the storage hopper by elevator, and then sent to main mill for grinding through feeder.

Phrase Three: Classifying

Ground material will be classified, coarse powder will fall back to the main mill for ground again.

Phrase Four: End Product Collecting

Qualified powder will flow with the air and be collected by dust collector, then the finished powder will be transported to the product storage bin through discharge port. Finally, powder will be loaded by tank car or packed by packing machine.

Running Plants


Too tired to read? Try staff service!

Engineer one-to-one for you, draw up plans in time, and provide investment estimates in time!

Staff ServiceGet Price

Maybe You're Interested

Quick Lime Grinding Plant In Hebei, China

Talc Grinding By SCM1000H Plant For Cosmetics Usage

Calcite Grinding Machine For Sale

How To Deal With The Dust Of Raymond Mill

Bentonite Grinding By MTW138 Plant For Oil Drilling Mud

Submit Demands Online

Fill your requirements on the following form, we will contact you as soon as possible.

*
*
*

Hot Sale