MTW European Version Mill Is Better For 200 Mesh Gypsum Powder Raymond Mill2021-04-07

Gypsum is a monoclinic mineral, and its main chemical component is calcium sulfate (CaSO4). It is a widely used industrial material and building material. After being ground into powder, it can be used in cement retarders, gypsum building products, model making, medical food additives, sulfuric acid production, paper fillers, paint fillers and other fields.

Gypsum powder processing and flour milling require gypsum powder equipment, that is, a mill, among which Raymond mills are more commonly used. The Raymond mill has a long history of application in the field of gypsum powder. After years of practice and continuous improvement, it has developed from the original traditional pendulum Raymond mill to the fourth generation through the second generation of high pressure suspension roller mill and the third generation of overpressure trapezoidal mill. The European version of the mill, the fifth-generation heavy-duty European version of the mill, and the smart European version of the mill.

Compared with traditional Raymond mills, European mills have greatly improved and improved in terms of output, environmental protection, and post-maintenance:

1. In terms of output, as far as gypsum milling is concerned, the output of the traditional Raymond mill is only about 0.5-9.5 tons, which is far from meeting the needs of large-scale plant construction in the modern powder industry, while the output of the European version of the mill can be Up to 3-55 tons, the output has been increased several times, and the energy consumption per unit capacity is lower.

2. In terms of environmental protection, the entire European version of the mill system runs under negative pressure to control the discharge of dust. Finally, the dust collector removes the excess dust in the pipeline, which can keep the entire workshop clean and tidy, and the dust emission concentration is controlled at 20mg/m3 , Lower than the national emission regulations.

3. In terms of post-maintenance, the traditional Raymond machine uses butter lubrication, while the European version mill's fan, spindle drive system and fan drive system all use thin oil lubrication. The oil change interval is about 4 months, the oil change interval is long, and the maintenance frequency is low , A year can save 30,000 to 50,000 yuan in fuel costs alone.

4. In terms of operation, the modern intelligent operating system is convenient and intelligent. All operations can be completed in the central control room. A powder workshop only needs 2-3 people, which greatly saves labor costs.

In summary, for the modern gypsum milling industry, the European version of the mill is a more suitable choice, and is the preferred choice for plant construction. In terms of the initial investment, it is much smaller than the vertical mill and is within the acceptable range of most customers.

Too tired to read? Try staff service!

Engineer one-to-one for you, draw up plans in time, and provide investment estimates in time!

Staff ServiceGet Price

Maybe You're Interested

Barite Grinding Processing Plant Supplier

First Choice Manufacturer For Grinding Coal

Calcium Carbonate Ball Mill Price In Rajasthan, India

Bentonite Grinding By MTW138 Plant For Oil Drilling Mud

MTM Medium-speed Grinding Mill

Hot Sale