email [email protected] | +86-21-58386189

Cone Crusher

Cone crusher is generally used as a secondary crushing in stone production line. we can supply HPT series multi-cylinder hydraulic cone crusher, CS series high-efficiency spring cone crusher and HST series single cylinder hydraulic cone crusher. Cone crusher machine is composed of frame, driving device and adjusting device, hydraulic system and lubrication system.

Cone Crusher

Working Principle Of Cone Crusher's Lubrication System

The full contact-type floating sealing device can provide friction force, which can limit the autorotational speed of moving cone and enhance the equipment stability when the equipment is idling. From the pressure oil lubricating before entering the cone crusher is divided into two ways, one way is through the oil flow indicator into the driving part of the shaft frame and the pinion thrust pad and end bearing. The second way is through the gap between the spindle and the spindle bushing, from the upper end of the eccentric sleeve overflow, lubrication size gear, into the cone crusher in the oil return cavity.

Cone Crusher Structure And Spare Parts

Cone Crusher Spare Parts

Cone Crusher Related Project Case

Model Cavity Maximum Feeding Size(mm) Minimum Discharging Size(mm) Capacity(t/h) Maximum Installed Power(kw)
HPT100 C1(Extra Coarse) 140 19 50-140 90
C2(Coarse) 100 13
M(Medium) 70 9
F1(Fine) 50 9
F2(Extra Fine) 20 6
HPT200 C2(Coarse) 185 19 90-250 160
M(Medium) 125 16
F1(Fine) 95 13
F2(Extra Fine) 75 10
HPT300 C1(Extra Coarse) 230 25 110-440 250
C2(Coarse) 210 19
M(Medium) 150 16
F1(Fine) 105 13
F2(Extra Fine) 80 10
HPT400 C1(Extra Coarse) 295 30 135-630 315
C2(Coarse) 251 25
M(Medium) 196 20
F1(Fine) 110 13
F2(Extra Fine) 90 10
HPT500 C1(Extra Coarse) 330 38 220-790 400
C2(Coarse) 290 30
M(Medium) 210 22
F1(Fine) 135 16
F2(Extra Fine) 95 13
HPT800 C1(Extra Coarse) 350 38 310-1200 630
C2(Coarse) 299 32
M(Medium) 265 25
F1(Fine) 220 16
F2(Extra Fine) 150 13
Model Movable Cone Diametermm (inch) Chamber Style Opening Side Closed Side Discharging Opening (mm) REV (r/min) Power (kw) Motor Model Capacity (t/h) Machine Size (mm)
Max.Feeding (mm)
CSB75 900 (3′) medium 83 102 9-22 580 6-75 Y315S-6/75 45-91 2821×1880 ×2164
coarse 159 175 13-38 59-163
CSD75 914 (3′) fine 13 41 3-13 580 6-75 Y315S-6/75 27-90 2821×1880 ×2410
medium 33 60 3-16 27-100
coarse 51 76 6-19 65-140
CSB160 1295 (4 1/4′) fine 109 137 13-31 485 6-185 Y355M2-6/185 109-181 2800×2342 ×2668
medium 188 210 16-31 132-253
coarse 216 241 19-51 172-349
CSD160 1295 (4 1/4′) fine 29 64 3-16 485 6-160 Y355M1-6/160 36-163 2800×2342 ×2668
medium 54 89 6-16 82-163
coarse 70 105 10-25 109-227
CSB240 1650 (5 1/2′) fine 188 209 16-38 485 6-240   181-327 3911×2870 ×3771
medium 213 241 22-51   258-417
coarse 241 268 25-64   299-635
CSD240 1650 (5 1/2′) fine 35 70 5-13 485 6-240   90-209 3917×2870 ×3771
medium 54 89 6-19   136-281
coarse 98 133 10-25   190-336
CSB400 2134 (7′) fine 253 278 19-38 435 6-400   381-726 5200×4300 ×4700
medium 303 334 25-51   608-998
coarse 334 369 31-64   870-1400
CSD400 2134 (7′) fine 51 105 5-16 435 6-400   190-408 5200×4300 ×4700
medium 95 133 10-19   354-508
coarse 127 178 13-25   454-599
Model Movable Cone Diameter(mm) Chamber Style Max Feeding (mm) Discharge Opening (mm) Capacity (t/h) Power (kw) Machine Size (mm)
HST100 790 EC 135 10-32 46-128 90 1550×1575×1965
C 90 10-25 43-118
M 65 8-16 36-76
MF 50 6-13 29-68
F 35 4-10 27-57
EF 28 6 30-40
HST160 956 EC 180 13-38 69-215 160 1875×1920×2400
C 145 13-32 65-197
MC 115 10-25 60-180
M 90 10-22 60-160
MF 75 8-19 61-125
F 50 6-19 45-105
EF 35 6 70-90
HST250 1150 EC 215 16-44 110-380 250 2100×2320×2780
C 175 13-38 100-385
MC 140 13-32 95-325
M 110 13-25 115-335
MF 85 10-22 90-280
F 70 8-19 90-235
EF 38 8 100-125
HST315 1408 EC 275 16-44 177-660 315 2380×2735×3265
CX 245 16-38 170-650
C 215 16-38 170-640
MC 175 16-32 160-552
M 135 16-32 195-500
MF 115 13-32 190-450
F 85 13-25 195-400
EF 65 13-22 210-300