email [email protected] | +86-21-58386189

500-600tph Limestone Crushing Production Line

Main equipment: PEW1100 Impact Crusher + PFW1318 Impact Crusher +VSI6X1263 Sand Making Machine

Process Flow

The limestone from the blasting of the mountain is pre-screened by the F5X1360(S) feeder. The feeder can screen the muck with its own screen. The small material directly enters the reverse silo of the impact crusher, and the large material is smashed. After the crushing, it also enters the transfer silo.

At the same time, the two PFW1318 Ш European version of the hydraulic three-chamber impact crusher crushing and crushing, the impact crusher material is sieved through the S5X2760 new vibrating screen, and the large material returns to the counter-shatter and break, 0-3- 6mm two kinds of stone powder are screened out, and the remaining 6-31.5 and other finished products enter the VSI6X1263 impact and break the sand, and the impact is broken out and then the two sets of S5ZX2760 vibrating screen are screened out 0-3-6-11-19-26.5-31.5 Six kinds of finished products such as mm.

limestone-crusher.jpg

Equipment Configuration Advantages

1. The layout of the whole production line is reasonable, the production line is very simple and smooth.

2. The project is equipped with our company's products that is high-yield and low-consumption, the same output of our company configuration than other peer manufacturers Reduce the energy consumption of at least 500KW in hours and reduce the operating cost of the production line.

3. To meet the customer requirements of the "three-stage crushing" concept, reducing the wear and tear of the major host equipment, equipment failure rate is greatly reduced.

 

Related Articles

Hot Product